Eaton BRP12L200R Main Lug BR Loadcenter 200A 120/240V 1PH3W N3R -E3166 NEW-B

THIS LISTING IS FOR ONE:CUTLER HAMMER EATON BRP12L200R LOADCENTER200 AMP MAIN LUG200 AMP, 120/240 VOLT, 1 PHASE, 3 WIREPLUG ON NEUTRALALUMINUM BUS, 12/24 CIRCUITNEMA 3R ENCLOSURE- OUTDOOR RATEDSURFACE COVER, APPROX DIMS 14.5 X 5.5 X 19STOCK # E3166 NEW IN BOX STOCK PICTURE MAY VARY FROM THE ACTUAL ITEM SHIPPED Terms and Conditions Product Conditions: New: The product is a new, unused item in its original factory packaging and is subject to a 1-year warranty. New / Unused Surplus: The product is a new, unused item that may or may not have its original packaging. The item has never been put into service and is subject to a 1-year warranty. New Take Out: The product is a new, unused item that may have been previously installed in electrical equipment but has never been energized. Seller Refurbished or Reconditioned: The product is inspected, cleaned, and repaired, found to be free of damage, fully functional, Electrically OK, Mechanically OK, and the labels are intact or replaced. The item may also be painted, relabeled, and have new parts installed as necessary. Equipment is tested for proper insulation resistance, contact resistance, operation, and performance. All reconditioned equipment meets performance, operation, and safety standards dictated by the OEM. PEARL or NETA (National Electrical Testing Association) performance standards will be used if OEM standards are not readily available to the public. Our certified technicians follow OEM, NETA, and PEARL reconditioning and performance standards to ensure that reconditioned equipment will perform as expected and meet or exceed its expected lifetime. Used: An item that has been used previously. The item may have some signs of cosmetic wear but is fully operational and functions as intended. This item may be a floor model or store return that has been used. As-Is and For Parts or Not Working: The product is shipped as pictured. The Item may or may not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. Warranty: One-Year Warranty – All New, Reconditioned, and Tested with Test Report Items Warranty will extend for 1 year from the date the item is shipped, during which time the product will operate satisfactorily under nameplate rated load and normal usage and conditions, after proper installation. 90 Day Warranty – All Used Items Warranty will extend for 90 days from the date the item is shipped, during which time the product will operate satisfactorily under nameplate rated load and normal usage and conditions, after proper installation. No Warranty- All As-Is and For Parts or Not Working Items All As-Is and For parts or Not Working Items do not include a warranty. The Electric Barn will not accept returns for these items. Note: Should the product fail during the warranty period, the buyer shall return the product to the seller, at the buyer’s expense, for inspection and verification of the warranty claim. Should the warranty claim be deemed valid, The Electric Barn will replace the item with equal value or refund the buyer the full purchase price of the product. If the product is repaired or replaced under warranty, the new warranty period will extend for 90 days from the shipping date of the repaired or replaced product. Altering, tampering with, or the removal of electrical labels voids all warranties. No Refunds on Labor. Note to Our Valued Customers and eBay Feedback: We sell and ship 100’s of items a day and complete a 3-point inspection process to verify correct and operational items are shipped. If you receive a damaged or incorrect item, please contact us immediately to handle any issue with your order. By contacting us directly, we will be able to expedite a replacement or refund as we value our customers and customer ratings on eBay. Manufacturer Disclaimer: The Electric Barn is not an authorized distributor for any of the manufacturers listed on our website. All product names, logos, and brands are the property of their respective owners.

Extech 200A AC/DC Clamp-on Probe Adaptor Works w/ DMM or Oscilloscope

Extech 200A AC/DC Clamp-on Probe Adaptor Works w/ DMM or OscilloscopeMeasures low current w/ resolution to 1mA AC or 10mA DC This is a new Extech 200A AC/DC Clamp-on Probe Adaptor Extech 200A AC/DC Clamp-on Adaptor Measures low currents with high resolution to 1mA AC or 10mA DC Plugs into any brand DMM with AC and DC mV input ranges for direct readings on multimeter display One touch “Auto Zero” for DCA measurements eliminates need to turn a knob to zero adjust 2.5″ (64mm) clamp jaw opening (750MCM) Measures AC/DC Current in two ranges: 0 to 200A and 0 to 2000A and converts it to 1mV/count for reading current on any multimeter or voltage recorder Banana plugs connect into standard multimeter sockets and switch multimeter to a millivolt or voltage range Basic accuracy to 2% up to 200A, 3% to 1500A Zero adjust knob for optimizing accuracy Connect to an oscilloscope to observe current signal waveforms (BNC to Banana Plugs not included.) Non-contact current monitoring and wave form pick-up Dimensions: 7.7 x 2.6 x 1.4″(195 x 66 x 35mm), Weight: 1.1lb (500g) Complete with built-in 1.8ft (570mm) cable with banana plugs Want to better understand how to use these AC/DC Clamp-on Probes, KainkaLabs on Youtube has an excellent video, just enter “KainkaLabs AC/DC Current-Probe” in the Youtube search bar to see the video. We’re e-liquidators. We specialize in Military, Government, Industrial and Business liquidation services, disposition and asset recovery management. Our surplus inventory comes to us from many sources, big and small: corporate clients, closing businesses, military DRMO’s, and local government agencies, and individuals. Feel free to contact us with your questions, concerns and suggestions. Contact information:We are “E-liquidators” on Facebook Google “E-liquidators” for additional informationPlease take a moment to see our current specials on eBay our other eBay listings. Powered by SixBit’s eCommerce Solution

4/0-4/0-2/0-4 Aluminum Mobile Home Feeder Cable (200 Amp) 600V

HomeView All ListingsStore PoliciesNewsletterFeedbackContact Us Store Categories Aluminum URD Cable Aluminum Service Drop Cable Aluminum XHHW-2 Wire Aluminum XLP USE-2 Aluminum SER Alpha Wire Belden Cable Bus Drop Cable Copper SER Copper XHHW-2 Wire Copper XLP USE-2 Diesel Locomotive Cable Festoon Cable Fire Alarm Cable High Temperature Wire Jumper Cable Type G & GG-C Thermostat Cable SOOW Power Cable NM-B Wire Security Fire Alarm Cable SIS Switchboard Wire Solar Photovoltaic PV Wire Stage Lighting Cable Submersible Pump Cable THHN THWN-2 Wire Tray Cable Type W Power Cable UF-B Cable Welding Cable 4/0-4/0-2/0-4 Aluminum Mobile Home Feeder Cable 600V Click Thumbnails to Enlarge APPLICATION • 4/0-4/0-2/0-4 Mobile Home Feeder cables is designed for mobile homes as a service entrance cable. The cable is sunlight resistant and is approved for use in accordance with the recommendations of the National Electric Code in raceways and underground installations. Maximum operating temperature is not to exceed 90°C in wet and dry locations. Voltage rating is 600 volts. CONDUCTOR • Compact strand soft drawn 8000 series aluminum conductor, per ASTM B-800 & B-801 INSULATION • Type USE-2/RHH/RHW-2 cross-linked polyethylene (XLP) insulation • Conductors are cabled together with a green XLP insulated aluminum ground • Grounding (neutral) conductor is identified by a longitudinal white stripe. STANDARDS • UL 44 for Type RHH & RHW-2 • UL 854 for Type USE-2 PRODUCT SPECIFICATIONS Size AWG 4/0 Cable Construction 4/0-4/0-2/0-4 Neutral Conductor Size AWG 2/0 Ground Wire Size AWG 4 Insulation Thickness (inches) 0.080 Cable Diameter (inches) 1.540 Ampacity 200 Amps Weight (Lbs/1000ft) 795 HAVE A LARGE ORDER OVER $5000? ASK US IF WE CAN DO BETTER ON THE PRICE. Shipping ***Free shipping on most orders. Need the wire fast? Ask about our expedited shipping to get it to you on time. Signature required for all deliveries. Please note eBay’s delivery dates are only estimates actual delivery dates may be faster or longer, please message us for exact delivery times.*** Payment & Returns ***All returns must be made within 30 days from the date of purchase or they will not be accepted. Nassau National Cable does not cover re-delivery fees, extraneous shipping expenses or change of address fees after shipping*** Feedback Feedback will be left as soon as feedback is left for us. About Nassau National Cable (disclaimer: these images of wire in no way reflect the product being sold and are for aesthetic purposes only) We have been in business for over 60 years and are family owned and operated. We have been on the inc 5000 in 2014, 2015, and 2016 as one of the fastest growing privately owned companies. We look forward to serving you. Some of our customers are shown below: Home View All Listings Store Policies Feedback Contact Us

#10-24 Phillips Pan Head Machine Screws, 18-8 A2 Stainless Steel US SAE Coarse

New Stainless Steel #10-24 Phillips Pan Head Machine Screws in the Length and Quantity you specify. Package quantities available in either 10, 25, 50, 100 and Bulk 500 pieces. Diameter : #10Thread Pitch : 24 TPI – UNC / Coarse Thread (Standard)Drive : #2 PhillipsType : Pan Head Machine ScrewMatching Nut & Washers: #10-24 Available hereSystem of Measurement : Standard (Inch / U.S.)Material : Stainless Steel 18-8 / 304 / A2Specifications : ASME B18.6.3-2002 & SAE J82

New Pressure Sensor for Caterpillar 2746719 274-6719 Fits Various Models

New pressure sensor for Caterpillar engines. Part #: 274-6719 Description: Sensor, pressure Quantity: 1 Shipping: $5.00 ATTENTION: We sell OEM, aftermarket and used parts. Please read the description to know what you are buying. The photo will be representative of the part you will receive, we don’t use “stock” photos. We are a legitimate business doing equipment repairs and engine rebuilds. If we are selling an aftermarket version of a part rest assured we have already used that part in the field and are very confident in its quality. This is our full time job, we aren’t working out of our basement. As such we will NEVER lie or misrepresent anything we sell just to make a couple bucks, our reputation is very important. We try to always provide free shipping but transportation costs have increased dramatically so please read the description. We will always state the shipping cost in the description. If you aren’t sure if the part will fit your equipment please send us your model and serial number and we can check. Thanks for looking and have a great day!

CBB Capacitors 100V 250V 400V 630V 1600V Polyester Film Capacitor-Various Values

Description: 100V 102 1nF/0.001uF -Lead Pitch 5mm 100V 472 4.7nF/0.0047uF -Lead Pitch 5mm 100V 103 10nF/0.01uF -Lead Pitch 5mm 100V 473 47nF/0.047uF -Lead Pitch 5mm 100V 104J 100nF/0.1uF -Lead Pitch 5mm 100V 224J 220nF/0.22uF -Lead Pitch 5mm 100V 474J 470nF/0.47uF -Lead Pitch 5mm 100V 105J 1000nF/1uF -Lead Pitch 5mm 250V 474 470nF/0.47uF -Lead Pitch 15mm 400V 103 10nF/0.01uF -Lead Pitch 10mm 400V 223 22nF/0.022uF -Lead Pitch 10mm 400V 473 47nF/0.047uF -Lead Pitch 10mm 400V 104 100nF/0.1uF -Lead Pitch 10mm 400V 224 220nF/0.22uF -Lead Pitch 15mm 400V 334 330nF/0.33uF -Lead Pitch 15mm 400V 474 470nF/0.47uF -Lead Pitch 15mm 400V 684J 680nF/0.68uF -Lead Pitch 15mm 400V 105 1000nF/1uF -Lead Pitch 20mm 400V 335 3300nF/3.3uF -Lead Pitch 25mm 630V 103J 10nF/0.01uF -Lead Pitch 10mm 630V 223 22nF/0.022uF -Lead Pitch 10mm 630V 473 47nF/0.047uF -Lead Pitch 15mm 630V 683 68nF/0.068uF -Lead Pitch 10mm 630V 104K 100nF/0.1uF -Lead Pitch 15mm 630V 154J 150nF/0.15uF -Lead Pitch 15mm 630V 224 220nF/0.22uF -Lead Pitch 15mm 630V 334 330nF/0.33uF -Lead Pitch 15mm 630V 474 470nF/0.47uF -Lead Pitch 20mm 630V 684 680nF/0.68uF -Lead Pitch 20mm 630V 105 1000nF/1uF -Lead Pitch 26mm 630V 225K 2200nF/2.2uF -Lead Pitch 27mm 1600V 103J 10nF/0.01uF -Lead Pitch 15mm Package include: According to your choice. Payment: We accept Paypal only, It is fast, Easy and Safe. Payment must be completed within 7 days. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES. Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment. Shipping: We Ship to Worldwide. Orders processed within 24-48 hours of payment verification. it will take 15-25 days for delivery. but Customs will random inspection some parcel, so that’s why some parcel need more than four weeks to arrive. Shipping time is only estimated and not guaranteed. We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address. Package to USA will Shipping by E-Package with Tracking Number(7-15 Days to Delivered). To other Countries will shipping by Post Air Mail without tracking number(ONLY when the order is over 20USD will supply Tracking Number Shipping Way!)(15-35 Days to Delivered) Items are shipped via China Post Air Mail. Guarantee: Good Good quality. Buy with confidence! If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it. Not accept returning of electronic components. Full refund after we receive our original item, Note: Return shipping is to be paid by the Buyer. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. On Jul-31-19 at 17:54:18 PDT, seller added the following information:

#4-40 – Phillips Pan Head Machine Screws, 18-8 A2 Stainless Steel, SAE Inch / US

This listing is for new Stainless Steel #4-40 Phillips Pan Head Machine Screws in the Length and Quantity you specify. Available in 1/8″ to 3/4″ lengthsPackage quantities available in either 10, 20, 50 and 100 pieces. Diameter : #4Thread Pitch : 40 TPI – UNC / Coarse ThreadDrive : #1 PhillipsType : Pan Head Machine ScrewMatching Nut & Washers: #4-40 Available hereSystem of Measurement : Standard (Inch / U.S.)Material : Stainless Steel 18-8 / 304 / A2Specifications : ASME B18.6.3-2002 & SAE J82