TIVAR® formulations are recognized worldwide for their wear and corrosion resistance, low friction surface and impact strength. TIVAR® can outperform stainless steel, yet it weighs. UHMW typically has warp, bow and creep, especially in thinner sizes.
UHMW Polyethylene Plastic CNC Mill Stock 2-1/2” x 5” x 7” (oversized).These are “drops” from a current machining process.These pieces are virgin plastic – not recycled.The actual dimensions vary slightly larger than listed, but they are at least 5”x7”x2-1/2”.They weigh approximately 3-1/2 pounds each. ***** Check out my other listings for FREE U.S. SHIPPING options *****(this might come in handy for West Coast or Alaska / Hawaii buyers) ***** Choose “LOCAL PICKUP” ONLY IF you are able to pick this up in Swannanoa, NC ***** **** ASK ABOUT LARGE QUANTITIES **** **** I’ll make you a SUPER deal! ****
Many Uses: Tapping blocks help with floor installation, used to tap laminate into place, DIY handmade, easy to cut, easy to machine into parts, precision parts can be made using techniques such as CNC machining, bending and heat gun forming.
HDPE is a polyethylene thermoplastic made from petroleum. It is sometimes called “alkathene” or “polythene” when used for pipes. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber. HDPE is commonly recycled.You are buying ONE piece of NATURAL POLYETHYLENE HDPE 1″ x 6″ x 12″This material is natural HDPE and is non-textured. This version of HDPE is softer than other textured versions of HDPE and can scratch easily. Light markings or lines may be commonly found on the surface due to the processes used by the manufacturer. All of our dimensions are NOMINAL. There is a tolerance of (+/-)1/8″ or 0.118″This material has unfinished saw cut edges.We also can do custom cuts, a minimum of 10 pieces. We cannot cut anything under 6″. Please message us before placing your order to get a quote.We offer other materials – please see store.We also build vacuum forming machines, roller die cutters, drying ovens, and CNC routers.We sell infrared heaters, vacuum pumps, and vacuum systems. Please message us with any additional questions.Shipping•Your order will be shipped within 1-3 business days once we receive your payment. If you pay by e-check, we will ship your order once your payment has cleared. We do not ship on weekends or public holidays •A shipping notification with a tracking number will be emailed to you once your order has been shipped. Please note there is not always a tracking number for international orders. We are not responsible for the time frame of delivery for the shipment. Once we ship your package, the carrier is responsible for the timing of the delivery. •We are not responsible for any customs duty incurred at foreign customs, or any hold ups with customs. Please note that international orders can be held in customs for up to 45 days, no questions asked. Payment & Return•Payment is accepted via PayPal, Custom orders can be placed through us, please message us about custom cuts. If a message is not sent to us before the purchase, there’s no guarantee the piece will be cut. •Items can be returned for exchange or refund within 30 days from the date you receive your merchandise. We are not responsible for any purchase after a 30-day period. Also shipping paid for the product is not refunded for returns that include your own reasoning for return, such as it does not work for your application or no longer need it. There is also a 20% restocking fee. •Return shipping is the responsibility of buyer.•If you have a problem with your order please contact us first. We are always willing to work things out.
HDPE is a polyethylene thermoplastic made from petroleum. HDPE is commonly recycled. This material is black HDPE and is non-textured. This version of HDPE is softer than other textured versions of HDPE and can scratch easily.
HIGH DENSITY POLYETHYLENE HDPE is a highly crystalline, non-polar thermoplastic resin. Therefore, antioxidants and ultraviolet absorbers need to be added to the resin to improve this deficiency. Many Uses: Tapping blocks help with floor installation, used to tap laminate into place, DIY handmade, easy to cut, easy to machine into parts, precision parts can be made using techniques such as CNC machining, bending and heat gun forming.
HDPE is a polyethylene thermoplastic made from petroleum. It is sometimes called “alkathene” or “polythene” when used for pipes. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber. HDPE is commonly recycled. You are buying TWO pieces of NATURAL POLYETHYLENE HDPE 1/4 ” x 8” x 12″ This material is natural HDPE and is non-textured. This version of HDPE is softer than other textured versions of HDPE and can scratch easily. Light markings or lines may be commonly found on the surface due to the processes used by the manufacturer. All of our dimensions are NOMINAL. There is a tolerance of (+/-)1/8″ or 0.118″ This material has unfinished saw cut edges. We also can do custom cuts, a minimum of 10 pieces. We cannot cut anything under 6″. Please message us before placing your order to get a quote. We offer other materials – please see store. We also build vacuum forming machines, roller die cutters, drying ovens, and CNC routers. We sell infrared heaters, vacuum pumps, and vacuum systems. Please message us with any additional questions. Shipping•Your order will be shipped within 1-3 business days once we receive your payment. If you pay by e-check, we will ship your order once your payment has cleared. We do not ship on weekends or public holidays •A shipping notification with a tracking number will be emailed to you once your order has been shipped. Please note there is not always a tracking number for international orders. We are not responsible for the time frame of delivery for the shipment. Once we ship your package, the carrier is responsible for the timing of the delivery. •We are not responsible for any customs duty incurred at foreign customs, or any hold ups with customs. Please note that international orders can be held in customs for up to 45 days, no questions asked. Payment & Return•Payment is accepted via PayPal, Custom orders can be placed through us, please message us about custom cuts. If a message is not sent to us before the purchase, there’s no guarantee the piece will be cut. •Items can be returned for exchange or refund within 30 days from the date you receive your merchandise. We are not responsible for any purchase after a 30-day period. Also shipping paid for the product is not refunded for returns that include your own reasoning for return, such as it does not work for your application or no longer need it. There is also a 20% restocking fee. •Return shipping is the responsibility of buyer.•If you have a problem with your order please contact us first. We are always willing to work things out.
I’ll make you a SUPER deal! These pieces are virgin plastic – not recycled. Chose “LOCAL PICKUP” only if you are able to pick this up in Swannanoa, NC . ASK ABOUT LARGE QUANTITIES .
Many Uses: Tapping blocks help with floor installation, used to tap laminate into place, DIY handmade, easy to cut, easy to machine into parts, precision parts can be made using techniques such as CNC machining, bending and heat gun forming.
LDPE is a thermoplastic made from the monomer ethylene. It was the first grade of polyethylene. It is not reactive at room temperatures, except by strong oxidizing agents, and some solvents cause swelling. It can withstand temperatures of 80 degrees Celsius continuously, and 95 degrees Cecilius for a short time. It is quite flexible, and tough but is breakable. You are buying ONE piece of WHITE POLYETHYLENE LDPE .060″ 12″x12″ All of our dimensions are NOMINAL. There is a tolerance of (+/-)1/8″ or 0.118″ We also can do custom cuts, a minimum of 10 pieces. We cannot cut anything under 6″. Please message us before placing your order to get a quote. We offer other materials – please see store. We also build vacuum forming machines, roller die cutters, drying ovens, and CNC routers. We sell Infrared Heaters, Vacuum Pumps, and Vacuum Systems. Please message us for any further questions. Shipping•Your order will be shipped within 1-3 business days once we receive your payment. If you pay by e-check, we will ship your order once your payment is cleared. We do not ship on weekend or public holidays •A shipping notification with a tracking number will be emailed to you once your order has been shipped. Please note there is not always a tracking number for international orders. We are not responsible for the time frame of delivery for the shipment. Once we ship your package, the carrier is responsible for the timing of the delivery. •We are not responsible for any customs duty incurred at foreign customs. Or any hold ups with customs. Please note that international orders can hold in customs for ups to 45 days, no questions asked. Payment & Return •Payment is accepted via PayPal, Custom orders can be place through us, please message us about custom cuts. If a message is not sent to us before the purchase, there’s no guarantee the piece will be cut. •Items can be returned for exchange or refund within 30 days from the date you receive your merchandise. We are not responsible for any purchase after a 30-day period. Also shipping paid for the product is not refunded for returns that include your own reasoning for return, such as it does not work for your application or no longer need it. There is also a 20% restocking fee. •Return shipping is the responsibility of buyer.•If you have a problem with your order please contact us first. We are always willing to work things out.