1Box – 560Pcs(12 sizes) 2:1 Heat Shrink Tubing. The Heat Shrink Tubing can be used for solder point protection, wire grouping and marking, color coding, reinforcing earphone and much more. Cover the exposed part that requires maintenance with these tubes and use a heat gun to shrink them quickly and evenly to form a neat and lasting tight joint.
Our marine heat shrink tubing satisfied for your different need. Simply slide heat shrink tubing be over your connection point and apply heat, professional connections made in seconds, waterproof and long-lasting insulation.
You will receive 1328 Pices + 1 CASE for storage and organization with marked diameters , will fit all your requirements. – 100% Brand New – 1060 PCS HEAT SHRINK TUBING Sleeve Cable Wire Wrap Tube 2:1 Assortment Kit Box Set – Ideal for automotive, boat, motorcycle, ATV and household electrical applications! These tubes are made of durable polyolefin rubber that shrinks up to half diameter for a tie fit. This set is perfect for professional electricians and homeowners usage – Color: Black,Red,Yellow,Blue and Green – Material: PE – Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter) – Operating Temperature: -55°C to +125°C – Minimum Shrinkage Temp: +70°C – Full Shrinkage Temp: +110°C Maximum – Tensile Strength: 10.4 Mpa – Dielectric Strength:15 kV/mm – Flammability: Flame Retardant Features – 1. Big collection of heat shrink tubing, 8 Specifications, 5 colors, 1328pcs – 2. Supplied Internal Diameter: 1.5 mm, 2.0 mm, 3.0 mm, 6 mm, 8 mm, 10 mm, 12 mm, & 14 mm
Big collection of heat shrink tubing, 8 Specifications, 5 colors, 560pcs. Type:Heat Shrink Tubing. Automotive, Boat, Motorcycle, ATV and Household Electrical Applications etc. Color:BLACK, YELLOW, RED, GREEN AND BLUE.
Premium-Quality Polyolefin Heat Shrinkable Tubing Wall Type: Single-wall (normal – does not have glue/adhesive inside) Sized by: ID (Inner Diameter) Shrink Ratio: 2 to 1 If you want to buy SMALL AMOUNTS, go here: https://www.ebay.com/itm/203049859100 If you need LARGER SIZES, go here: https://www.ebay.com/itm/203049616047 If you need dual-wall (ADHESIVE/MARINE) tubing, go here: https://www.ebay.com/itm/203049856945 When choosing sizes, make sure you are thinking in terms of DIAMETER. Diameter is the measure of a round object, not flat. Larger sizes may be flat prior to usage, but they are still ALWAYS sized by ID (inner diameter). Refer to the chart/diagram in the additional photos for further reference! SUMMARY:Made of premium cross-linked polyolefin, a robust and versatile material with excellent properties and durability2 to 1 shrink ratio; will shrink to one half of the nominal (named) diameterThe named diameter is the size BEFORE shrinking. The diameter will shrink to HALF of the named size.Single-wall; contains no adhesivesThe tubing is sized by ID (inner diameter). Diameter is the measure across the opening of a round opened tube. Measuring across the flattened tube is different. Consult the chart in the photos if needed! 😅COSMETICS: The tubes are matte finish, not slick/shiny. Most of these tubes normally have the specs printed in tiny text on one side of the tube. However, clear tubing NEVER has text printed on it. White tubes USUALLY have no text. LARGE black tubes usually have no text. You can message me to check the current stock before you buy, just tell me the size(s) and color(s) you need 👍 RECOMMENDED EQUIPMENT:”Heat gun”, “task oven”, or “tubing torch” to shrink the tubing at 90°C ~ 110°CelsiusDo not overheat the tubing, you can compromise it! Do not use tubing which has been overheated!Work in a non-flammable and well-ventilated workspaceAlways use safety gloves, protective eyewear, and a respiratory mask when heating materials* * * * NOT SURE WHICH SIZE YOU NEED? A “sample” order comes with three pieces for just $1-2. If you are just size-checking, you can request us to send three DIFFERENT sizes. Example: order the 13mm sample and then message us something like “Please send one piece of 13mm, one piece of 10mm, and one piece of 8mm. I am not sure which I need.” This way you don’t need to purchase three different samples! 😉 * * * * SAFETY/TIPS:Do not perform repairs of electrical/electronic components unless you are a qualified, experienced, and knowledgeable professional. Performing repairs can be very dangerous. Don’t do something stupid! Seek professional assistance/advice!The tubing, adhesive, and items you are working with can get very hot! Be careful not to burn yourself – avoid touching heated objects/materials!Heat-resistant gloves, protective eyewear, and respiratory mask are all recommended. Work in a well-ventilated area and non-flammable workspace. Clear your surroundings to avoid accidents! This includes children and pets!Read and obey all safety instructions for operation of the heat source you choose to utilize when heating the tubing. “Heat guns” or specialized “task ovens” are recommended. Do not exceed 110 degrees Celsius when shrinking the tubing to avoid burning/degrading the tubing! Hair driers do not get hot enough to shrink most tubes, however they may be useful for tiny sizes. Torch/flame is not recommended as you may burn/damage the tubing.While heated, the tubing is in a softened state until it cools, and thus may be easily damaged. Avoid stretching the tubing until it cools and firms up. USAGE INSTRUCTIONS:Read safety guidelinesPrepare equipment and work areaSlide tubing over wireApply heat to tubing to reach 90°C to 110°CelsiusAllow tubing and wire to cool HANDY TIP: The tubing is sized by ID (inner diameter). If you only know the flat width of the tube size you need (measuring across a flattened tube), but aren’t sure what ID you should choose, you can quickly approximate diameter by dividing by 1.6! For example: If you need a tube that is 3 inches wide when flattened, you would divide 3″ by 1.6, which equals 1.875″. That means you should order the 2″ ID tube
Premium-Quality Polyolefin Heat Shrinkable Tubing Wall Type: Single-wall (normal – does not have glue/adhesive inside) Sized by: ID (Inner Diameter) Shrink Ratio: 2 to 1 Length: Use the “Lot Size” dropdown to choose either pre-cut pieces or a 10ft uncut coil If you need an uncut or longer length of tubing, we can almost always do this upon request. For example you could choose to buy 4x quantity of the “4 feet” option and then tell us not to cut it so that you get a 16-foot piece. Just let us know, send us a message! We are eager to accommodate your needs! If you need smaller sizes, go here: https://www.ebay.com/itm/203049859100 If you need dual-wall (adhesive) tubing, go here: https://www.ebay.com/itm/203049856945 When choosing sizes, make sure you are thinking in terms of DIAMETER. Diameter is the measure of a round object, not flat. Larger sizes may be flat prior to usage, but they are still ALWAYS sized by ID (inner diameter). Refer to the chart/diagram in the additional photos for further reference! SUMMARY:Made of premium cross-linked polyolefin, a robust and versatile material with excellent properties and durability2 to 1 shrink ratio; will shrink to one half of the nominal (named) diameterThe named diameter is the size BEFORE shrinking. The diameter will shrink to HALF of the named size.Single-wall; contains no adhesivesThe tubing is sized by ID (inner diameter). Diameter is the measure across the opening of a round opened tube. Measuring across the flattened tube is different. Consult the chart in the photos if needed! 😅COSMETICS: The tubes are matte finish, not slick/shiny. Most of these tubes normally have the specs printed in tiny text on one side of the tube. However, clear tubing NEVER has text printed on it. White tubes USUALLY have no text. LARGE black tubes usually have no text. You can message me to check the current stock before you buy, just tell me the size(s) and color(s) you need 👍 RECOMMENDED EQUIPMENT:”Heat gun”, “task oven”, or “tubing torch” to shrink the tubing at 90°C ~ 110°CelsiusDo not overheat the tubing, you can compromise it! Do not use tubing which has been overheated!Work in a non-flammable and well-ventilated workspaceAlways use safety gloves, protective eyewear, and a respiratory mask when heating materials SAFETY/TIPS:Do not perform repairs of electrical/electronic components unless you are a qualified, experienced, and knowledgeable professional. Performing repairs can be very dangerous. Don’t do something stupid! Seek professional assistance/advice!The tubing, adhesive, and items you are working with can get very hot! Be careful not to burn yourself – avoid touching heated objects/materials!Heat-resistant gloves, protective eyewear, and respiratory mask are all recommended. Work in a well-ventilated area and non-flammable workspace. Clear your surroundings to avoid accidents! This includes children and pets!Read and obey all safety instructions for operation of the heat source you choose to utilize when heating the tubing. “Heat guns” or specialized “task ovens” are recommended. Do not exceed 110 degrees Celsius when shrinking the tubing to avoid burning/degrading the tubing! Hair driers do not get hot enough to shrink most tubes, however they may be useful for tiny sizes. Torch/flame is not recommended as you may burn/damage the tubing.While heated, the tubing is in a softened state until it cools, and thus may be easily damaged. Avoid stretching the tubing until it cools and firms up. USAGE INSTRUCTIONS:Read safety guidelinesPrepare equipment and work areaSlide tubing over wireApply heat to tubing to reach 90°C to 110°CelsiusAllow tubing and wire to cool HANDY TIP: The tubing is sized by ID (inner diameter). If you only know the flat width of the tube size you need (measuring across a flattened tube), but aren’t sure what ID you should choose, you can quickly approximate diameter by dividing by 1.6! For example: If you need a tube that is 3 inches wide when flattened, you would divide 3″ by 1.6, which equals 1.875″. That means you should order the 2″ ID tube
1Box – 560Pcs(12 sizes) 2:1 Heat Shrink Tubing. SIMPLE AND SAFE : Cover the exposed part that requires maintenance with these tubes and use a heat gun to shrink them quickly and evenly to form a neat and lasting tight joint.
HFT5000 is made from a very flexible heatshrinkable fabric and at a temperature above +110ºC shrinks to fit securely around a range of shapes and sizes. It also provides outstanding abrasion, chafing and cutting protection, even at high temperatures.
$0.00 shipping 4.5 Meter Heat Shrink Tubing Tube Black 1mm 1.5mm 2mm 3mm 4mm 5mm 8mm 10mm 100% brand new and high quality Shrinking temperature: 80 Deg.C Temperature Range: -40℃-105℃ Shrinkage ratio: ≥48±5% Wall thickness: approx. 0.1MM (before shrinkage) Length:15ft (4500mm) Color: Black Package Contents: 15ft(4.5M）Black Heat Shrink Tubing(choose the model you want) Note:inner size If you can not find the parts you want in our shop, you can leave us message or send email. We have much more parts than the one showed in our shop. Large orders are very welcome. 120PCS/bag 12 Values 1UF-470UF 50V Radial Electrolytic Capacitors Assortment Kit
Item Description： Item Description： Wire wrap can shrink up to half its original diameter. 1Roll Dia. 1 2 3 4 5 6 8 10 2 14 16 18 20 22 25 30mm Heat Shrinkable Tube shrink Tubing Length 200m/100m/25m Temperature range: -50 ° C (-58 ° F) to 125 ° C (257 ° F) Selectable colors:Red / Black / White / Green / Blue / Yellow / Clean