#10 Truss Head Sheet Metal Screws Self Tap Phillips Stainless Steel All Sizes
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 60 Days |
| Brand | Fastenere |
| Fastener Type | Sheet Metal Screw |
| Drive Type | Phillips |
| Head Style | Truss Head |
| MPN | PTSMS188SS #10 |
| Grade | 18-8 |
| Material | Stainless Steel |
| Thread Diameter (in.) | 0.190" |
| Drive Style | Phillips |
| Thread Size Base | #10 |
#10 Phillips Truss Head Self Tapping Sheet Metal Screws Stainless Steel A Truss head screw has a head with flat underside and a slightly domed top. It has almost no exposed edge. Sheet Metal Screws have deep spiral threads the entire length and with a pointed end. Holds thin metal sheets together. Holds well in wood, Plastic, and Fiberglass. Manufactured from metal. Can be rotated into or out of the object using a screwdriver.SHEET METAL SCREWS HAVE SHARP THREADS THAT CUT INTO MATERIALS SUCH AS: Plastic Plexi glass Wood And of course sheet metal Sheet metal screws are also the go to fasteners for use with plastic wall anchors in drywall. Tapping screws are considered externally threaded fasteners that "tap" their own mating threads in metallic and non-metallic (such as plastic) materials. Tapping screws, especially Type A, are referred to as "sheet metal screws" because one of their first applications was in ventilation ducts made of sheet metal. They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood Phillips drive is x-shaped for installation with a phillip screw driver. The design is often criticized for its tendency to cam out at lower torque levels than other "cross head" designs. There has long been a popular belief that this was actually a deliberate feature of the design, for the purpose of assembling aluminum aircraft without over tightening the fasteners. About Self tapping Screws A self-tapping screw is a screw that can tap its own hole as it is driven into the material. Some self-tapping screws are also self-drilling, which means that, in addition to the tap-like flute in the leading threads, there is also a preliminary drill-like fluted tip that looks much like the tip of a center drill. The screws in this auction are not "Self Drilling" and do require a pilot hole for a thick gauge material General Product Information Head Style : Truss Drive Style : Phillips Drive Size : #2 Screw Size : #10 Material : Stainless Steel 18-8 Length : Choose Desired Length From Drop Down Menu Quantity of Fasteners in Package : Choose Desired Item Package Quantity From Drop Down Detailed Product Information: Head Diameter : 0.448" Head Height : 0.118" Body Diameter : 0.190" Thread Coverage : Full Thread Point Style : Type A Self Tapping Key Notes: Stainless steel phillips truss head sheet metal screws will have no problem punching through a thin or light guage sheet metal but will require a pilot hole for a thicker guage metal; the phillips drive has a tendency to slip if there is too much torque applied during installation and these machine screws being made of a high quality stainless steel which is softer than other non corrosion resistant fasteners are also susceptible to stripping so it is recomended to use a slower speed or to set the clutch on the driver so when the machine screw is fastened completely the drill does not shred the phillips drive Phillips truss head sheet metal screws with a self tapping thread patern that forms its own threads in the material it is being screwed into and is mainly used for attatching two pieces of metal together but also works great in wood and plexiglass because of the coarse thread The low profile of the truss head gives a very clean appearance as well as offering a much larger than most surface area that is perfect for applications where there is a risk of a screw head pulling through a pilot hole and are commonly used in RV restoration Made from stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance; 18-8 stainless steel truss head sheet metal screws are a better choice than 410 self drilling screws in out door applications that will be visible because unlike 410 stainless with a high iron content these screws have a low iron content and will not rust or turn red Fastenere brand stainless steel sheet metal screws offer the corrosion resistance and strength that makes them the best choice for an application that is exposed to a wet or damp enviroment and will withstand the test of time Shipping: All orders placed before 3:30 pm EST Will Ship Same Day Tracking is provided on ALL Orders Priority Mail Shipping service is offered at a discount of only $3.95 UPS Ground UPS Next Day Air is available, Please inquire for pricing Returns : ALL returns are accepted if returned within 60 days. Money Back or exchange guaranteed. NO Restocking Fees. For YOU, we constantly strive to find ways to improve our performance.
Related Items
