HotCoat 40kV Powder Coating System Features ✅Compatible with a wide range of HotCoat powders and accessories. ✅12.1’ powder feed hose and 12’ air tubing allow comfortable reach around parts Includes fluidizing tube for smooth, consistent powder flow from hopper.
The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating System gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. Easy To Apply and Provides Extremely Durable Finish Economical – Quick Color Changes – Coat and Cure In Under An Hour! Operates on Standard 120v / 60Hz Household Current Versatility with two settings for improved coverage Low 15,000-Volt Setting and High 25,000-Volt Setting For Multi-Coat Coverage Over Larger Areas Increased Powder Adhesion and Minimal Overspray The Hotcoat Benchtop Powder Booth is a simple but effective conversion kit that transforms a 20 inch box fan into a booth for powder coating. Captures Over 95% of Powder Overspray Compact Size and Easy to Assemble Uses Your Standard 20 Inch Box Fan Perfect For Powder Coating in a Garage or Small Shop Includes Rods For Hanging Parts The Eastwood Hotcoat Filter Tack Spray transforms pleated fiberglass HVAC filters into a powder coat “trap” capturing and eliminating 99% of overspray in your shop. The Filter Tack Spray is a environmentally-friendly, non toxic coating that treats 10 standard 20″ x 20″ x 1″ filters. Eastwood HotCoat® PCS-250 Powder Coating System Specifications 15KV/25KV dual voltage output New and improved ground clamp provides a better ground Color coordinated cabling for easier setup New clear bottle makes it easy to see powder level and fluidizing action Additional 1/2″ of trigger room makes it easier and more comfortable to use Eastwood HotCoat® BenchTop Powder Coating Booth Kit Specicfications Box Fan Size: 20″ (Commonly available at Walmart or Home Depot) Air Filter Size: 20″ x 20″ x 1″ HVAC/furnace air filter, pleated, fiberglass type only. MERV rating not impactful. Frame Construction: 18 gauge (1.2mm) steel, black powder coat Contents (1) 33278 Eastwood Hotcoat PCS-250 Dual Voltage Powder Coating System (1) 70016 HotCoat BenchTop Powdercoating Booth (1) 72054 HotCoat 20x20x1 Powder Booth Filter (1) 69481Z HotCoat Filter Tack Spray Box Fan is not included
The Eastwood Hotcoat Benchtop Powder Coating Oven combines generous internal volume in a convenient, compact package with big oven features. Ideal Oven for Small to Mid-Size Powder Coating Projects Compact Design Easily Stores Under a Bench and is Ready When You Need It Heats Up Fast With Upper and Lower Heating Elements Air Circulation Fan Allow Optimum Control of Heat Distribution Built-In Timer for the Desired Cure Time This oven has selectable upper and lower Heating Elements, and air Circulation Fan allow optimum control of heat distribution inside the Oven. The Oven Door window presents a convenient view of parts during the critical “flow-out” stage, enabling proper setting of the built-in Timer for the desired cure time. Couple this oven with any of Eastwood’s HotCoat Powder Coating Guns and start coating brackets, housings, and other small to medium-sized parts right in your home shop or garage. Specifications Electrical Rating: 120V / 50/60Hz / 1 Ph Heating Power: 1600W Heating Elements: Top: 2x 400W / Bottom: 2x 400W Minimum Ambient Temperature: 50°F Oven Chamber Temperature Range: 150 – 400°F Timer Range: 0-60 Minutes Circulation Fan: Yes Rack Levels: (Top / Middle / Bottom) Internal Volume (W x D x H): 15.12″ x 12.83″ x 10.71″ (384 x 326 x 272mm) 1.2 ft3 (34L) Power Cord Length: 31.5″ (0.80m) Overall Dimensions: 20.55″ x 15.47″ x 13.19″ (522 x 393 x 335mm) Weight: 14.6 lbs (6.62kg) Certification: ELT Product Weight: 8.2 lbs. At HOME Powder Coating! – HotCoat Benchtop Oven – Eastwood – YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo]
This accessories kit comes with the items you need to start powder coating. Includes 1/2″ High Temperature Fiberglass Masking Tape (30) High Temp Silicone Plugs Assortment 1 lb spool Safety Wire .041″ 8 ounces High Gloss Jet Black Powder (3) 8 ounce plastic bottles & lids Disposable In Line Air Filter The high temperature tape and silicone plugs make it easy to mask areas you do not want to get powder on. The safety wire is great for hanging parts on your powder coating rack or oven. This kit also comes with an in-line air filter to keep contaminates out of your gun and powder. Also included is an 8 oz. bottle of high gloss black powder and extra storage bottles.
This Eastwood Powder Coating has everything you need to start powder coating at home. All you need is a small air compressor and a 110 Volt power source. The PCS-250 Makes Powder Easy To Apply and Provides Extremely Durable Finish. Economical – Quick Color Changes – Coat and Cure In Under An Hour Low 15,000-Volt Setting and High 25,000-Volt Setting For Multi-Coat Coverage Over Larger Areas. Versatility with two settings for improved coverage The Hotcoat Benchtop Oven Heats Up Fast With Upper and Lower Heating Elements with a Air Circulation Fan Allow Optimum Control of Heat Distribution The Powder Coating Booth Captures Over 95% of Powder Overspray and is a Compact Size and Easy to Assemble Uses Your Standard 20 Inch Box Fan. Perfect For Powder Coating in a Garage or Small Shop The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating System gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. The Eastwood Hotcoat Benchtop Powder Coating Oven combines generous internal volume in a convenient, compact package with big oven features. This oven has selectable upper and lower Heating Elements, and air Circulation Fan allow optimum control of heat distribution inside the Oven. The Hotcoat Benchtop Powder Booth is a simple but effective conversion kit that transforms a 20 inch box fan into a booth for powder coating. The Eastwood Hotcoat Filter Tack Spray transforms pleated fiberglass HVAC filters into a powder coat “trap” capturing and eliminating 99% of overspray in your shop. The Filter Tack Spray is a environmentally-friendly, non toxic coating that treats 10 standard 20″ x 20″ x 1″ filters. Contents (1) 33278 Eastwood Hotcoat PCS-250 Dual Voltage Powder Coating System (1) 68076 HotCoat BenchTop Powder Coating Oven (1) 70016 HotCoat BenchTop Powdercoating Booth (1) 72054 HotCoat 20x20x1 Powder Booth Filter (1) 69481Z HotCoat Filter Tack Spray Box Fan is not included
Brand new in box. If buying multiple message me for a discount