#10-32 – Phillips Pan Head Machine Screws – Steel w/ Black Oxide SAE Fine Inch

Leave a comment

This listing is for new steel #10-32 Phillips PAN HEAD Machine Screws with a Black Oxide and Oil finish. Diameter : #10 / 3/16″Thread Pitch : 32 TPI – UNC / Fine ThreadLength : See Diagram to RightDrive : #2 PhillipsType : Pan Head Machine ScrewMatching Nut & Washers : #10-32 Available here System of Measurement : Inch (US) / SAEMaterial : Steel w/ Black Oxide CoatingSpecifications : ASME B18.6.3-2010 & SAE J82Tensile Strength : 60,000 psi min.Hardness : Rockwell B70-B1002 Available Lengths #10-32 x 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 7/8″, 1″, 1-1/4″

5mm x 3mm N52 Strong Round Disc Rare Earth Neodymium Magnet 5x3mm

Leave a comment

5mm x 3mm N52 Strong Round Magnets Rare Earth Magnets Specification:Dimensions: 5mm x 3mm thick Tolerances: ±0.2mm x ±0.2mm Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Max Operating Temp: 176ºF (80ºC) Pull Force: Approx. 1.6 lb Material Features: N52 grade Magnets are made of a brittle material. These magnets are not as strong as steel. They are more like a brittle ceramic. If you let two magnets slam together, they can crack and break. This is true for magnets large and small. WARNING!!! Strong magnets should Keep away from Ironware and some easily magnetized iron products, such as monitors, bank cards, computers, televisions, mobile phones and other. These magnets are very powerful which should be handled with great care. Without parents supervised do not allow children to playing magnets as they could get injured. Especially pay attention to the small magnets, please place in somewhere children can’t reach place.